Table of Contents
Advertisement
Logging the Key Sequence into a Program (Option 1C2 Only)
When Option 1C2 is installed, the logging function allows you to log your key sequence into an
instrument BASIC program. This function allows you to create a program without referring to
the GPIB Command Reference .
1. Press
NNNNNNNNNNNNNNNNNNNN
IBASIC .
4
System
5
2. Toggle
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOGGING on OFF to
3. Press the front panel keys according to your required setting.
4. Press
NNNNNNNNNNNNNNNNNNNN
IBASIC .
System
4
5
5. Toggle
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOGGING ON off to
6. Press
NNNNNNNNNNNNNN
EDIT to enter the edit mode.
7. Verify that the program was created according to your key sequence.
Note
When you log the calibration and the xture compensation procedure, you
must modify the program to wait for completion of the calibration or the
xture compensation.
5-10
T ypical Functions
NNNNNNNNNNNNNNNNNNNN
ON off .
NNNNNNNNNNNNNNNNNNNN
on OFF .
Advertisement
Table of Contents
