Segmnum; Setcdate - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

SEGMNUM

SEGMNUM
Syntax
SEGMNUM <numeric>
SEGMNUM?
Description
For the active trace (set with the "TRAC" command on page 457), if the search range is set
to a segment for the list sweep (specified to SEGMENT with the "SEARNG" command on
page 432), sets a segment as the search range.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Search]
key

SETCDATE

Syntax
SETCDATE <year>,<month>,<day>
SETCDATE?
Description
Sets the date of the built-in clock of the 4294A.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{year},{month},{day}<newline><^END>
Corresponding
[System]
key
436
Description Segment number of the search range
Range 1 to the number of segments in the list sweep table
Initial value 1
Resolution 1
-
SEARCH RANGE MENU
Description Year
Range 1900 to 2099
Resolution 1
DATE 
- -
CLOCK
<numeric>
-
SEGMENT NUMBER
<year> <month>
Month
1 to 12
1
<day>
Day
1 to 31
1
Chapter 16