Limstest - Agilent Technologies 4294A Programming Manual

LIMSTEST

Syntax LIMSTEST {ON|OFF|1|0}
LIMSTEST?
Description In the creation/edit of the limit line table for the active trace (set with the "TRAC"
command on page 457), toggles on and off the limit test function for each segment.
If segment creation/edit has not been started, executing this command automatically starts
the edit of the edit target segment and then turns on/off the function.
If the creation/edit of the limit line table has not been started, executing this command
automatically starts table creation/edit, starts the edit of the edit target segment, and then
turns on/off the function.
Parameters
ON or 1 (initial value)
OFF or 0
Query response {1|0}<newline><^END>
Corresponding
[System]
key
Chapter 16
Turns on the segment limit test function.
Turns off the segment limit test function.
- -
LIMIT TEST EDIT LIMIT LINE
GPIB Command Reference
Description
- - -
EDIT more 1/3 more 2/3 - TEST on OFF
LIMSTEST
335