Mindcv; Mkr - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

MINDCV

MINDCV
Syntax
MINDCV <numeric>[V]
MINDCV?
Description
Sets the voltage limit minimum value when the dc bias output mode is the constant-voltage
mode or constant-current mode (CVOLT or CCURR has been specified with the
"DCMOD" command on page 291).
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Source]
key

MKR

Syntax
MKR {ON|OFF|1|0}
MKR?
Description
For the active trace (set with the "TRAC" command on page 457), toggles on and off the
marker function. In the coupled marker mode (set with the "MKRCOUP" command on
page 352), the setting is applied to both the A and B traces regardless of the active trace
setting. Turning off the marker function using this command initializes the marker related
settings.
Parameters
Query response {1|0}<newline><^END>
Corresponding
[Marker]
key
350
Description Voltage limit minimum value of the dc bias output
Range -40 to 40
Initial value -40
Unit V (volt)
Resolution 1E-3
- -
BIAS MENU
ON or 1
OFF or 0 (initial value)
- MKR ON off
<numeric>
MIX LIMIT VOLTAGE
Turns on the marker function.
Turns off the marker function.
Description
Chapter 16