Resavd; Resd - Agilent Technologies 4294A Programming Manual

RESAVD

Syntax RESAVD <string>
Description
Updates the specified file on the built-in mass storage of the 4294A specified with the
"STOD" command on page 445. When specifying a file, use a file name including its
extension (refer to Table 8-1 on page 113). If the specified file does not exist, an error
occurs and the command is ignored. (No query)
Parameters
Description
Range
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
[Save]
key

RESD

Syntax RESD
Description
Changes the measured value list display screen to the normal measurement screen. To
return to the list display screen, execute the "LISV" command on page 341. (No query)
Corresponding
[Copy]
key
Chapter 16
File name (including the extension) you want to update
12 characters or less (including the extension)

-
RE-SAVE FILE
- -
SELECT CONTENTS LIST VALUE - RESTORE DISPLAY
GPIB Command Reference
<string>

RESAVD
411