Omon; Opep; Ose - Agilent Technologies 4294A Programming Manual

OMON

Syntax OMON {ON|OFF|1|0}
OMON?
Description Toggles on and off the oscillator level monitor function.
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Corresponding
[Display]
key

OPEP

Syntax
OPEP
Description Lists the measurement parameter, sweep type, number of points, delay time (for each
sweep, for each measurement point), sweep range (start value, stop value), and point
averaging count on the LCD screen of the 4294A. (No query)
Corresponding
[Copy]
key

OSE

Syntax OSE <numeric>
OSE?
Description Sets the value of the Operation Status Enable Register.
Parameters
Description
Range
Initial value
Resolution
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
No front panel key is available to execute this function.
key
Chapter 16
Turns on the oscillator level monitor function.
Turns off the oscillator level monitor function.
- OSC MON on OFF
OPERATING PARAMETERS 
- SELECT CONTENTS -
Value of the register
0 to 65535
0
1
GPIB Command Reference
Description
<numeric>
OMON
365