Outgio; Outhio - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

OUTGIO

OUTGIO
Syntax
OUTGIO <numeric>
Description Outputs data to output port G (port A + port B + port C) of the 24-bit I/O port. Data is
outputted as 20-bit binary, assuming that A0 is LSB and C3 is MSB. If port C is set to an
input port, executing this command causes an error and the command is ignored. This
command has the same function as the WRITEIO 16,6 command of Instrument BASIC.
(No query)
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Corresponding No front panel key is available to execute this function.
key

OUTHIO

Syntax
OUTHIO <numeric>
Description Outputs data to output port H (port A + port B + port C + port D) of the 24-bit I/O port.
Data is outputted as 24-bit binary, assuming that A0 is LSB and D3 is MSB. If port C or
port D is set to an input port, executing this command causes an error and the command is
ignored. This command has the same function as the WRITEIO 16,7 command of
Instrument BASIC. (No query)
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Corresponding
No front panel key is available to execute this function.
key
372
Description Output data
Range 0 to 1048575
Resolution 1
Description Output data
Range 0 to 16777215
Resolution 1
<numeric>
<numeric>
Chapter 16