Swed; Swet - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

SWED

SWED
Syntax
SWED {UP|DOWN}
SWED?
Description
Selects the sweep direction.
Parameters
Query response
{UP|DOWN}<newline><^END>
Corresponding
[Sweep]
key

SWET

Syntax
SWET <numeric>[S]
SWET?
Description
Sets the sweep time.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Sweep]
key
448
UP (initial value) Specifies the sweep parameter increasing direction (from left to
right on the screen).
DOWN Specifies the sweep parameter decreasing direction (from right to
left on the screen).
-
DIRECTION [ ]
Description Sweep time
Range 0 to 10000 (Note that, the lower limit varies depending on the
measurement condition.)
Initial value Varies depending on the measurement condition.
Unit s (second)
Resolution 0.001
- -
TIME SWEEP TIME
Description
<numeric>
Chapter 16