Mkrcoup; Mkrdspan; Mkrl - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

MKRCOUP

MKRCOUP
Syntax
MKRCOUP {ON|OFF|1|0}
MKRCOUP?
Description As the marker move setting, selects the mode in which the markers on traces A and B are
coupled when they are moved (coupled marker mode) or the mode in which the markers on
traces A and B are moved separately. (uncoupled marker mode).
If the markers on traces A and B are at different positions when changing the mode from
the uncoupled marker mode to the coupled marker mode, to the position of the marker on
the active trace (set with the "TRAC" command on page 457), the other marker is moved.
Parameters
Query response {1|0}<newline><^END>
Corresponding
[Marker]
key

MKRDSPAN

Syntax
MKRDSPAN
Description For the active trace (set with the "TRAC" command on page 457), sets the sweep
parameter value difference between the Δ marker and the marker as the span value of the
sweep range. If the Δ marker mode is off, executing this command causes an error and the
command is ignored. (No query)
Corresponding
[Marker→]
key

MKRL

Syntax
MKRL {ON|OFF|1|0}
MKRL?
Description
For the active trace (set with the "TRAC" command on page 457), toggles on and off the
marker list function. If the marker function is off, executing this command causes an error
and the command is ignored.
Parameters
Query response {1|0}<newline><^END>
Corresponding
[Utility]
key
352
ON or 1 (initial value)
OFF or 0
-
MKR COUPLE ON off
MKRΔ → SPAN
-
ON or 1
OFF or 0 (initial value)
- MKR LIST on OFF
Description
Specifies the coupled marker mode.
Specifies the uncoupled marker mode.
Description
Turns on the marker list function.
Turns off the marker list function.
Chapter 16