Outpmin; Outpminmax - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

OUTPMIN?

OUTPMIN?
Syntax
OUTPMIN?
Description Reads out the value of the minimum measurement parameter value within the waveform
analysis range set with the "ANARANG" command on page 267 and the sweep parameter
value at the position. If there are several measurement points of the minimum measurement
parameter value, reads out the value of the leftmost measurement point within the analysis
range.(Query only)
Query response
{numeric 1},{numeric 2}<newline><^END>
Readouts are as follows:
{numeric 1}:
{numeric 2}:
Corresponding No front panel key is available to execute this function.
key

OUTPMINMAX?

Syntax
OUTPMINMAX?
Description Within the waveform analysis range set with the "ANARANG" command on page 267,
reads out the maximum measurement parameter value and the sweep parameter value at
the position and the minimum measurement parameter value and the sweep parameter
value at the position. If there are several measurement points of the minimum or maximum
measurement parameter value, reads out the value of the leftmost measurement point
within the analysis range. (Query only)
Query response
{numeric 1},{numeric 2},{numeric 3},{numeric 4}<newline><^END>
Readouts are as follows:
{numeric 1}:
{numeric 2}:
{numeric 3}:
{numeric 4}:
Corresponding
No front panel key is available to execute this function.
key
386
Minimum measurement parameter value.
Sweep parameter value at the position of the minimum measurement
parameter value
Minimum measurement parameter value.
Sweep parameter value at the position of the minimum measurement
parameter value.
Maximum measurement parameter value.
Sweep parameter value at the position of the maximum measurement
parameter value.
Chapter 16