Landscape; Limclel - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

LANDSCAPE

LANDSCAPE
Syntax
LANDSCAPE {ON|OFF|1|0}
LANDSCAPE?
Description
Enables/disables landscape printing for printout.
Parameters
Query response {1|0}<newline><^END>
Corresponding
[Copy]
key

LIMCLEL

Syntax
LIMCLEL
Description
In the creation/edit of the limit line table, deletes all segments. Executing this command
during the execution of segment creation/edit causes an error. If the creation/edit of the
limit line table has not been started, executing this command automatically starts table
creation/edit and then deletes all segments.(No query)
NOTE Executing the "LIMEDONE" command on page 326 brings the created/edited limit line
table to take effect.
Corresponding
[System]
key
324
ON or 1
OFF or 0 (initial value)
- SETUP - more 1/2
- LIMIT TEST -
Specifies landscape as the print direction.
Specifies portrait as the print direction.
- LANDSCAPE on OFF
CLEAR LIST 
EDIT LIMIT LINE -
Description
Chapter 16