Ecalqui; Editdone; Editliml; Editlist - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

ECALQUI

ECALQUI
Syntax
ECALQUI
Description Aborts the measurement of data to calculate the setup data of the selected adapter. (No
query)
Corresponding
[Cal]
key

EDITDONE

Syntax EDITDONE
Description
Finishes the creation/edit of the list sweep table. Executing this command brings the
created/edited table to take effect. (No query)
Corresponding
[Sweep]
key

EDITLIML

Syntax
EDITLIML
Description Starts the creation/edit of the limit line table. (No query)
Corresponding
[System]
key

EDITLIST

Syntax EDITLIST
Description
Starts the creation/edit of the list sweep table. If a segment is being created/edited,
executing this command causes an error and the command is ignored. (No query)
Corresponding
[Sweep]
key

ENKEY

Syntax
ENKEY
Description Enables the operation of the front panel keys and the rotary knob that has been disabled
with the "DSKEY" command on page 308. (No query)
Corresponding
No front panel key is available to execute this function.
key
310
- ADAPTER [ ] - SETUP
- -
EDIT LIST done
EDIT LIMIT LINE 
- LIMIT TEST -
EDIT LIST 
-
- cancel
Chapter 16