Using Printer
Printing onto a Printer Directly Connected to Agilent 4294A
Printing onto a Printer Directly Connected to Agilent 4294A
The Agilent 4294A provides direct connection to a printer, allowing you to print a
hardcopy of the LCD screen.
The printer can be connected to the printer parallel port on the rear panel of the 4294A. See
Operation Manual for detailed information on the connection and supported printers.
Setting images to be printed
Besides traces, the following items can be displayed on the LCD for printing.
Sweep and measurement parameters for all
measurement points
Current parameter values for setting of the instrument
Setting values set for a user-defined calibration kit
Setting values for a fixture compensation standard
List sweep table
Limit line table
Use the command below to restore the normal screen display from the screen with the
above items.
•
"RESD" on page 411
248
Items
Command
"LISV" on page 341
"OPEP" on page 365
"CALS" on page 275
"COMS" on page 281
"DISL" on page 299
"DISLLIST" on page 299
Chapter 14