Purg - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

PURG

PURG
Syntax
PURG <string>
Description Deletes the specified file on a built-in mass storage of the 4294A specified with the
"STOD" command on page 445. When specifying a file, use a file name including its
extension (refer to Table 8-1 on page 113). If the specified file does not exist, an error
occurs. (No query)
Parameters
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
[Save]
key
406
Description File name (including the extension) you want to delete
Range 12 characters or less (including the extension)
- -
FILE UTILITIES
<string>
PURGE FILE 
Chapter 16