Widsout; Widt - Agilent Technologies 4294A Programming Manual

WIDSOUT

Syntax WIDSOUT
Description
For the trace bandwidth analysis function for the active trace (set with the "TRAC"
command on page 457), further searches for another cutoff point outside the already
detected cutoff point. If no cutoff point is detected, the message indicating the result is
displayed (no error occurs). If the trace bandwidth analysis function is off, executing this
command causes an error and the command is ignored. (No query)
Corresponding
[Search]
key

WIDT

Syntax
WIDT {ON|OFF|1|0}
WIDT?
Description
For the active trace (set with the "TRAC" command on page 457), toggles on and off the
trace bandwidth analysis function. If the trace bandwidth analysis function is set to on and
If no bandwidth can be detected, the message indicating the result is displayed (no error
occurs). If the marker function is off, executing this command causes an error and the
command is ignored.
Parameters
ON or 1
OFF or 0 (initial value) Turns off the trace bandwidth analysis function.
Query response {1|0}<newline><^END>
Corresponding
[Search]
key
Chapter 16
- -
WIDTHS DEF MENU SEARCH OUT
Turns on the trace bandwidth analysis function.
- WIDTHS on OFF
GPIB Command Reference
WIDSOUT
Description
461