Baci; Beepdone - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

BACI

BACI
Syntax
BACI <numeric>[PCT]
BACI?
Description
Sets the brightness of the background color on the display screen. You specify the
brightness in a percentage of the white level (the level of white, larger means brighter).
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Display]
key

BEEPDONE

Syntax
BEEPDONE {ON|OFF|1|0}
BEEPDONE?
Description Enables/disables the beep to notify the completion of operation (at the completion of
calibration or saving instrument states).
Parameters
Query response
{1|0}<newline><^END>
Corresponding
[System]
key
270
Description Percentage of the white level
Range 0 to 100
Initial value 0
Unit % (percentage ratio)
Resolution 1
- -
more 1/2 MODIFY COLOR
ON or 1 (initial value)
OFF or 0
- BEEPER - BEEP DONE on OFF
<numeric>
-
BACKGROUND INTENSITY
Description
Enables the beep.
Disables the beep.
Chapter 16