Agilent Technologies 4294A Programming Manual page 173

Saving/Recalling a File in/from an External Computer
*2.If user calibration data haven't been measured or haven't been entered by use of
applicable commands, the values of calibration arrays will not be contained in
the files saved.
*3.This operation is ignored if an Instrument BASIC program is being edited or
run on the 4294A.
*4.If an Instrument BASIC program is being edited or run on the 4294A, the pro-
cess of editing or running is suspended, and Instrument BASIC is reset, then
the programs are downloaded and run.
Chapter 12
Using LAN
173