GPIB Command Reference
MKRO
MKRO
Syntax
MKRO {DATA|MEMO}
MKRO?
Description
For the active trace (set with the "TRAC" command on page 457), sets the trace on which
you want to use the markers. The displayed traces are the settable trace. Executing this
command to specify a trace not displayed causes an error and the command is ignored.
Parameters
Query response
{DATA|MEMO}<newline><^END>
Corresponding
[Marker]
key
MKROFS
Syntax
MKROFS
Description
For the active trace (set with the "TRAC" command on page 457), sets the measurement
parameter value at the marker position to the trace offset value. If the marker function is
off, executing this command causes an error and the command is ignored. (No query)
Corresponding
[Marker→]
key
356
DATA (initial value)
Specifies the data trace.
MEMO
Specifies the memory trace.
-
MKR [ ]
MKR → OFFSET
-
Description
Chapter 16