Scac; Scaf - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

SCAC

SCAC
Syntax
SCAC {ON|OFF|1|0}
SCAC?
Description
For the active trace (set with the "TRAC" command on page 457), enables/disables the use
of the same scale for the data trace and memory trace. If the scale setting differs between
the data trace and the memory trace, executing this command to specify the use of the same
scale unifies the scale setting to that of the scale setting target trace (set with the "SCAF"
command on page 422).
If either the data trace or the memory trace is not displayed, executing this command
causes an error and the command is ignored.
Parameters
Query response {1|0}<newline><^END>
Corresponding
[Scale Ref]
key

SCAF

Syntax
SCAF {DATA|MEMO}
SCAF?
Description
For the active trace (set with the "TRAC" command on page 457), if the setting is made so
that data trace and memory trace do not use the same scale (set to OFF with the "SCAC"
command on page 422), selects the trace to which the scale setting is applied.
If either the data trace or the memory trace is not displayed, executing this command
causes an error and the command is ignored.
Parameters
Query response {DATA|MEMO}<newline><^END>
Corresponding
[Scale Ref]
key
422
ON or 1 Enables the use of the same scale.
(initial value)
OFF or 0 Disables the use of the same scale.
- -
more1/2 D&M COUPLE ON off
DATA Specifies the data trace to which the scale setting is applied.
(initial value)
MEMO Specifies the memory trace to which the scale setting is applied.
- -
more1/2 SCALE FOR [ ]
Description
Description
Chapter 16