Dmode; Dout - Agilent Technologies 4294A Programming Manual

DMODE

Syntax DMODE {DMY|MDY}
DMODE?
Description When the date printout setting is enabled (specified to ON with the "COPT" command on
page 283), sets the display format of the date.
Parameters
DMY
MDY (initial value) Specifies the setting to display the date in the order of
Query response
{DMY|MDY}<newline><^END>
Corresponding
[System]
key

DOUT

Syntax DOUT
DOUT?
Description Sets the input/output direction of port D (24-bit I/O port) to output.
To change the input/output direction of port D to input (preset state), use the "DIN"
command on page 297.
Query response {1|0}<newline><^END>
1
0
Corresponding
No front panel key is available to execute this function.
key
Chapter 16
Specifies the setting to display the date in the order of
Day/Month/Year.
Month/Day/Year.
- CLOCK - DATE MODE [ ]
Output is selected as the input/output direction of port D.
Input is selected as the input/output direction of port D.
GPIB Command Reference
Description
Description
DMODE
307