Extreme Networks ExtremeWare XOS Command Reference Manual page 1002

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Security Commands
Period ( . )
●
Colon ( : )
●
When configuring an IP address for your network server, remember the requirements listed above.
Remote Filename Character Restrictions. This section provides information about the characters
supported by the switch for remote filenames.
When specifying a remote filename, the switch permits only the following characters:
Alphabetical letters, upper case and lower case (A-Z, a-z)
●
Numerals (0-9)
●
Period ( . )
●
Dash ( - )
●
Underscore ( _ )
●
Slash ( / )
●
When naming a remote file, remember the requirements listed above.
Example
The following command downloads a private key from a TFTP server with the IP address of 123.45.6.78:
download ssl 123.45.6.78 privkey t00Ts1e
History
This command was first available in the ExtremeWare XOS 11.2 and supported with the SSH module.
Platform Availability
This command is available on all platforms.
1002
ExtremeWare XOS 11.5 Command Reference Guide