Mru - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mru

mru mruSize
Syntax
no mru
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum allowable size in bytes of the maximum receive unit for interfaces
Description
on cOCx/STMx, COCX-F3, CT3, and POS modules. The no version restores the default
value, which varies according to module type.
Options
Interface Configuration
Mode
1418
mru
mruSize Maximum allowable size of the MRU; default and range varies with
module type:
Interfaces on cOCx/STMx, CT3, and COCX-F3 modules Number in the
range 4–9996; default value is 1600
Interfaces on POS modules Number in the range 1–9996; default value is
4470