Table of Contents
Advertisement
Configuring Remote Settings
Configuring Routing Instance Objects
Copyright © 2010, Juniper Networks, Inc.
A remote settings object defines the DNS and WINS servers that are assigned to L2TP
RAS users after they have connected to the L2TP tunnel. You can use remote settings
objects in an L2TP VPN, and when configuring a local user on a specific device.
NOTE: For information about configuring XAuth and L2TP local users on a
device, see Network and Security Manager Configuring ScreenOS and IDP
Devices Guide.
Security devices incorporate DNS (domain name server) and WINS support to permit
the use of domain names as well as IP addresses for identifying locations. A DNS or WINS
server keeps a table of the IP addresses associated with domain names. Using DNS or
WINS, you can reference locations by their domain name (www.juniper.net) in addition
to using a routeable IP address (such as 209.125.148.136).
Before you can use DNS or WINS for domain name/address resolution in a VPN, you
must create remote settings for the DNS or WINS servers (primary and secondary).
To configure a remote setting, select Remote Settings and click the Add icon. Enter a
name, color, and comment for the object, then configure the following parameters:
DNS1—Enter the IP address of the primary DNS server.
DNS2—Enter the IP address of the secondary DNS server.
WINS1—Enter the IP address of the primary WINS server.
WINS2—Enter the IP address of the secondary WINS server.
A routing instance is a collection of routing tables, interfaces contained in these routing
tables, and routing option configurations. You can use Object Manager to configure a
routing instance object. The routing instance objects configured in Object Manager can
be included in the RADIUS server and LDAP server configurations within the access profile
object. A routing instance object is a polymorphic object (similar to zone objects) that
maintains the mapping between the actual routing instance and the device in which it is
created. For details about polymorphic objects, see "Polymorphic Objects" on page 530.
To view all routing instance objects, select Routing Instance Objects in the navigation
tree. The Object Manager displays all the routing instance objects in the routing instance
table. You can create, view, edit, or delete a routing instance object in the Object Manager.
You can also perform a Find Usages operation, and view the version history of a routing
instance object. For more information on configuring routing instances, see the Junos
Routing Protocols Configuration Guide.
Chapter 8: Configuring Objects
413
Advertisement
Table of Contents
