Creating A Qos Parameter On An Interface Superset Or Interface Set; Configuring A Qos Parameter Definition For An Interface Superset Or An Interface Set; Creating A Qos Parameter Instance For An Interface Superset - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide

Creating a QoS Parameter on an Interface Superset or Interface Set

Configuring a QoS Parameter Definition for an Interface Superset or an Interface Set

Creating a QoS Parameter Instance for an Interface Superset

204
Tasks to create a QoS parameter on an interface superset or an interface set include:
Configuring a QoS Parameter Definition for an Interface Superset or an Interface
Set on page 204
Creating a QoS Parameter Instance for an Interface Superset on page 204
Creating a QoS Parameter Instance for an Interface Set on page 205
You can configure a parameter definition to recognize an interface superset or an interface
set as controlled-interface types and instance interface-types.
Controlled-interface types specify resources that the parameter instance can control.
Instance-interface types are the interface types to which the QoS client can apply a
parameter instance.
To specify an interface set or an interface superset in a QoS parameter definition:
Specify the QoS parameter definition.
1.
host1(config)#qos-parameter-define business
Configure the controlled-interface type and specify the interface set or the interface
2.
superset.
host1(config-qos-parameter-define)#controlled-interface-type set
host1(config-qos-parameter-define)#controlled-interface-type superset
You can specify up to four controlled-interface types for each parameter definition.
Configure the instance-interface type and specify the interface set or the interface
3.
superset.
host1(config-qos-parameter-define)#instance-interface-type set
host1(config-qos-parameter-define)#instance-interface-type superset
You can specify up to eight instance-interface types for each parameter definition.
To create a QoS parameter instance for an interface superset:
Specify the QoS interface superset.
1.
host1(config)#qos-interface-superset vlan-superset
Create the QoS parameter instance.
2.
host1(config-qos-interface-superset)#qos-parameter business-data
Attach the QoS profile.
3.
host1(config-qos-interface-superset)#qos-profile vlan
Copyright © 2010, Juniper Networks, Inc.