Table of Contents
Advertisement
Services
Configure the device to accept location messages from external
sources
You can configure the IX10 device to accept NMEA and TAIP messages from external sources. For
example, location-enabled devices connected to the IX10 device can forward their location
information to the device, and then the IX10 device can serve as a central repository for this location
information and forward it to a remote host. See
information about configuring the IX10 device to forward location messages.
This procedure configures a UDP port on the IX10 device that will be used to listen for incoming
messages.
Required configuration items
The location server must be enabled.
n
UDP port that the IX10 device will listen to for incoming location messages.
n
Access control list configuration to provide access to the port through the firewall.
n
To configure the device to accept location messages from external sources:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Forward location information to a remote host
Use Digi Remote Manager to view and manage your
Location information
for
527
Advertisement
Table of Contents
