Services
Configure the device to accept location messages from external
sources
You can configure the IX10 device to accept NMEA and TAIP messages from external sources. For
example, location-enabled devices connected to the IX10 device can forward their location
information to the device, and then the IX10 device can serve as a central repository for this location
information and forward it to a remote host. See
information about configuring the IX10 device to forward location messages.
This procedure configures a UDP port on the IX10 device that will be used to listen for incoming
messages.
Required configuration items
The location server must be enabled.
n
UDP port that the IX10 device will listen to for incoming location messages.
n
Access control list configuration to provide access to the port through the firewall.
n
To configure the device to accept location messages from external sources:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Forward location information to a remote host
Use Digi Remote Manager to view and manage your
Location information
for
453