Loads Fitted To The Robot, Stopping Time And Braking Distances - ABB OmniCore IRB 6740 Product Manual

3.3.6 Loads fitted to the robot, stopping time and braking distances

Define loads carefully
Any loads mounted on the robot must be defined correctly and carefully (with
regard to the position of center of gravity and mass moments of inertia) in order
to avoid jolting movements and overloading motors, gears and structure.
Load diagrams, permitted extra loads (equipment) and their positions are specified
in the product specification. The loads must be defined in the software.
Stopping time and braking distances
The performance of the motor brake depends on if there are any loads attached
to the robot.
See the product specification for the robot, listed in
Product manual - IRB 6740
3HAC085701-001 Revision: A
3.3.6 Loads fitted to the robot, stopping time and braking distances
CAUTION
Incorrectly defined loads may result in operational stops or major damage to the
robot.
© Copyright 2023 ABB. All rights reserved.
3 Installation and commissioning
References on page 10.
77