Table of Contents
Advertisement
5 Repair
5.4.1 Replacing the balancing device
Continued
Required service parts
Consumable
Locking liquid
Protection plug
VK cover, 100x10
Rust preventive
Flange sealant for conical fittings
Locking liquid
Required tools and equipment
Equipment
Lock screw, M16x120
Hydraulic press equipment, balan-
cing device
Dismantle and mounting tool
Hydraulic pump 80 MPa
Hydraulic cylinder
Lifting accessory (chain)
Lifting shackle
Standard toolkit
Continues on next page
212
Article number
-
3HAC4836-26
3HAA2166-13
3HAC034903-001
-
-
Article number
-
3HAC074411-001
3HAC028920-001
3HAC13086-1
3HAC11731-1
3HAC15556-1
-
-
© Copyright 2023 ABB. All rights reserved.
Note
Loctite 2400 (or equivalent Loctite
243)
Located at the front link ear of the
balancing device.
Replace if damaged.
Located at the cradle of the balan-
cing device. 2 pcs required.
Replace if damaged.
Mercasol 3110 Waxcoat. Recom-
mended drying time is 24h.
Loctite 5400 (or equivalent Loctite
577)
Loctite 2400 (or equivalent Loctite
243)
Note
Used to secure lower arm.
Used to unload or restore a balan-
cing device.
User instructions are enclosed
with the tool.
Used for removing and fitting
shaft and bearings.
User instructions are enclosed
with the tool.
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment.
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment.
Lifting instruction 3HAC15880-2
enclosed.
SA-10-8-NA1
Content is defined in section
Standard toolkit on page
652.
Product manual - IRB 6740
3HAC085701-001 Revision: A
Advertisement
Table of Contents
Troubleshooting
