ABB OmniCore IRB 6740 Product Manual page 502

5 Repair
5.9.1 Replacing the axis-1 gearbox
Continued
2
Concluded refitting of the front shaft
1
Continues on next page
502
Action
Refit new VK covers or reuse the old cov-
ers if they are undamaged.
Note
Temporarily remove the protection plug on
the cradle to let go of overpressure if the
VK covers are hard to fit.
xx2300000003
Action
Restore the balancing device according to
instructions for the press equipment.
xx0900000813
Go to the user instructions enclosed with
the press tool.
DANGER
Handling the tool incorrectly will cause
serious injury.
Read and follow enclosed user instructions
for the tool.
© Copyright 2023 ABB. All rights reserved.
Note
VK cover, 100x10, 3HAA2166-13
xx2200001464
Note
User instructions are enclosed with the
tool.
Product manual - IRB 6740
3HAC085701-001 Revision: A