ABB OmniCore IRB 6740 Product Manual page 341

4
Product manual - IRB 6740
3HAC085701-001 Revision: A
Action
Fit a screw to the power connector.
Note
The purpose of the screw is to secure the
mating of the connectors and the position-
ing of the connector in the connection box.
It is normal that the connector can be
moved back and forth after the screw has
been tightened according to the torque
specification and, in some connection
boxes, that the screw is not even fully inser-
ted when it bottoms.
© Copyright 2023 ABB. All rights reserved.
5.7.2 Refitting the cable harness
Note
Tightening torque: 1 Nm
xx2200001736
Continues on next page
5 Repair
Continued
341