ABB OmniCore IRB 6740 Product Manual page 255

Removing the lifting accessory and locking screw
1
2
3
Product manual - IRB 6740
3HAC085701-001 Revision: A
5.4.3 Replacing the rear bearings on the balancing device
Action
Remove the lifting accessory from the bal-
ancing device.
Remove the lock screw (M16x120).
Foundry Plus:
Apply Mercasol in the hole for the locking
screw.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200001332
xx1400000372
Continues on next page
5 Repair
Continued
255