Table of Contents
Advertisement
S
C
M
YSTEM
ONFIGURATION AND
SHOW REBOOT HISTORY
show reboot history
Overview
Use this command to display the device's reboot history.
show reboot history [<stack-ID>]
Syntax
Mode
User Exec and Privileged Exec
Example
To show the reboot history of stack member 2, use the command:
awplus#
Output
Figure 6-15: Example output from the show reboot history command
awplus#show reboot history 2
Stack member 2:
<date>
<time>
-----------------------------------------------
2014-01-10 01:42:04
2014-01-10 01:35:31
2014-01-10 01:16:25
failure!
2014-01-10 01:11:04
failure!
2014-01-09 20:46:40
2014-01-09 19:56:16
2010-01-09 20:36:06
reboot prevention)
2014-01-09 19:51:20
Table 6: Parameters in the output from the show reboot history command
C613-50103-01 REV A
C
ONITORING
OMMANDS
Parameter
<stack-ID>
show reboot history 2
<type>
<description>
Expected
User Request
Expected
User Request
Rebooting due to critical process (network/nsm)
Unexpected
Rebooting due to critical process (network/nsm)
Unexpected
Unexpected
Rebooting due to VCS duplicate member-ID
Expected
User Request
Rebooting due to VCS duplicate master (Continuous
Unexpected
Expected
User Request
Parameter
Unexpected
Expected
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Stack member number, from 1 to 8.
Description
A non-intended reboot.
The reboot is counted by the continuous reboot
prevention feature, as long as the reboot occurred in the
time period specified for continuous reboot prevention.
A planned or user-triggered reboot.
The reboot is not counted by the continuous reboot
prevention feature.
263
Advertisement
Table of Contents
