Clear Line Console - Allied Telesis x310-26FT Command Reference Manual

U A C
SER CCESS OMMANDS

CLEAR LINE CONSOLE

clear line console
Overview This command resets a console line. If a terminal session exists on the line then the
terminal session is terminated. If console line settings have changed then the new
settings are applied.
clear line console 0
Syntax
Mode Privileged Exec
Example To reset the console line (asyn), use the command:
awplus#
awplus#
Related clear line vty
Commands
flowcontrol hardware (asyn/console)
line
show users
C613-50103-01 REV A
clear line console 0
% The new settings for console line 0 have been applied
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
153