YASKAWA GA800 Technical Reference page 578

11.9 F: Options
No.
Name
(Hex.)
F6-46 BACnet Baud Rate
(02FC)
F6-47 Rx to Tx Wait Time
(02FD)
F6-48 BACnet Device Object
Identifier0
(02FE)
F6-49 BACnet Device Object
Identifier1
(02FF)
F6-50 DeviceNet MAC Address
(03C1)
F6-51 DeviceNet Baud Rate
(03C2)
F6-52 DeviceNet PCA Setting
(03C3)
F6-53 DeviceNet PPA Setting
(03C4)
F6-54 DeviceNet Idle Fault
Detection
(03C5)
F6-55 DeviceNet Baud Rate
Monitor
(03C6)
F6-56 DeviceNet Speed Scaling
(03D7)
F6-57 DeviceNet Current
Scaling
(03D8)
F6-58 DeviceNet Torque
Scaling
(03D9)
F6-59 DeviceNet Power Scaling
(03DA)
F6-60 DeviceNet Voltage
Scaling
(03DB)
578
V/f CL-V/f OLV CLV AOLV
Sets the BACnet communications speed.
0 : 1200 bps
1 : 2400 bps
2 : 4800 bps
3 : 9600 bps
4 : 19.2 kbps
5 : 38.4 kbps
6 : 57.6 kbps
7 : 76.8 kbps
8 : 115.2 kbps
V/f CL-V/f OLV CLV AOLV
Sets the wait time for the drive to receive and send BACnet communication.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
V/f CL-V/f OLV CLV AOLV
Sets the MAC address for DeviceNet communication. Restart the drive after you change
the parameter setting.
Note:
Be sure to set a MAC address that is different than all other node addresses. Do not set
this parameter to 0. Incorrect parameter settings will cause AEr [Station Address
Setting Error] errors and the MS LED on the option will flash.
V/f CL-V/f OLV CLV AOLV
Sets the DeviceNet communications speed. Restart the drive after you change the
parameter setting.
0 : 125 kbps
1 : 250 kbps
2 : 500 kbps
3 : Adjustable from Network
4 : Detect Automatically
V/f CL-V/f OLV CLV AOLV
Sets the format of data that the DeviceNet communication master sends to the drive.
V/f CL-V/f OLV CLV AOLV
Sets the format of data that the drive sends to the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the function to detect EF0 [Option Card External Fault] when the drive does not
receive data from the DeviceNet master.
0 : Enabled
1 : Disabled, No Fault Detection
2 : Vendor Specific
3 : RUN Forward
4 : Reverse run
V/f CL-V/f OLV CLV AOLV
Sets the function to see the actual DeviceNet communications speed using the keypad.
This parameter functions as a monitor only.
0 : 125 kbps
1 : 250 kbps
2 : 500 kbps
V/f CL-V/f OLV CLV AOLV
Sets the speed scale for DeviceNet communication.
V/f CL-V/f OLV CLV AOLV
Sets the current scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the torque scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the power scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the voltage scale of the DeviceNet communication master.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Default
Ref.
(Range)
3 870
(0 - 8)
5 ms 871
(5 - 65 ms)
0 871
(0 - FFFF)
0 871
(0 - 3F)
64 871
(0 - 64)
4 871
(0 - 4)
21 872
(0 - 255)
71 872
(0 - 255)
0 872
(0 - 4)
0 872
(0 - 2)
0 872
(-15 - +15)
0 872
(-15 - +15)
0 873
(-15 - +15)
0 873
(-15 - +15)
0 873
(-15 - +15)