YASKAWA GA800 Technical Reference page 183

A - Monitor Parameter 1 (set with [Custom Monitor 1])
B - Monitor Parameter 2 (set with [Custom Monitor 2])
C - Trend Plot 2 Scale Maximum/Minimum Value
■
Select Monitor Items to Show as a Trend Plot
The procedure in this section shows how to show the frequency reference monitor as a trend plot.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push [Menu].
3.
Push or
4.
Push or
5.
Push or
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
, push [Back] to show [Home] on
to select [Monitors], then push
to select [Trend Plot], then push
to select [Custom Monitor 1], then push
D - Trend Plot Time Scale
E - Trend Plot 1 Scale Maximum/Minimum Value
.
.
[Setup].
.
4.6 Keypad Operation
183
4