YASKAWA GA800 Technical Reference page 1048

12.11 o: Keypad-Related Settings
■
o3-04: Select Backup/Restore Location
No.
Name
(Hex.)
o3-04 Select Backup/Restore
Location
(0B3E)
You can use the LCD keypad to make a maximum of 4 parameter backup sets.
0 : Memory Location 1
1 : Memory Location 2
2 : Memory Location 3
3 : Memory Location 4
■
o3-05: Select Items to Backup/Restore
No.
Name
(Hex.)
o3-05 Select Items to Backup/
Restore
(0BDA)
0 : Standard Parameters
1 : Standard + DWEZ Parameters
Note:
• Parameters qx-xx [DriveWorksEZ Parameters] and rx-xx [DriveWorksEZ Connections] show when A1-07 = 1 or 2 [DriveWorksEZ
Function Selection = DWEZ Enabled or Enabled/Disabled wDigital Input].
• The password for DriveWorksEZ PC software is necessary to back up qx-xx and rx-xx. If you enter an incorrect password, the drive detects
PWEr [DWEZ Password Mismatch].
■
o3-06: Auto Parameter Backup Selection
No.
Name
(Hex.)
o3-06 Auto Parameter Backup
Selection
(0BDE)
When you connect the drive and keypad, parameters set to the drive are automatically backed up to the keypad as
specified by the setting of parameters o3-06 and o3-07.
0 : Disabled
1 : Enabled
Note:
When you replace the LCD keypad then energize the drive, the keypad shows the restore operation screen automatically to restore the drive
configuration with the parameters backed up to the LCD keypad. If you connect an LCD keypad that does not have parameter backup data,
the keypad will not show the restore operation screen.
■
o3-07: Auto Parameter Backup Interval
No.
Name
(Hex.)
o3-07 Auto Parameter Backup
Interval
(0BDF)
The drive saves parameter settings to the keypad at these times:
1. After you energize the drive and the auto backup period passes.
2. When you use ROM enter or the keypad to change parameters, the drive saves those changes in the drive, waits
for the auto backup period to pass, then saves those parameters in the keypad.
1048
V/f CL-V/f OLV CLV AOLV
Sets the storage location for drive parameters when you back up and restore parameters. This
parameter is only available when using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets which parameters are backed up, restored, and referenced. This parameter is only available when
using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the function that automatically backs up parameters. This parameter is only available when
using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the interval at which the automatic parameter backup function saves parameters from the drive
to the keypad.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Default
(Range)
0
(0 - 3)
Default
(Range)
1
(0, 1)
Default
(Range)
1
(0, 1)
Default
(Range)
1
(0 - 3)