YASKAWA GA800 Technical Reference page 241

Ac drive for industrial applications

Hide thumbs Also See for GA800:

Table of Contents

Figure 5.2 Wiring Diagram for CE Low Voltage Directive Compliance

Connect peripheral options to terminals -, +1, +2, B1, and B2.

WARNING! Sudden Movement Hazard. Make sure that the polarity is correct before you send a Run command. If the drive

incorrectly detects the polarity, the drive can rotate in the direction opposite of the Run command and cause serious injury or

To protect the circuit, the main circuit is separate from the surface case that can touch the main circuit.

The control circuit is a Safety Extra-Low Voltage circuit. Use reinforced insulation to separate this circuit from other circuits. Make sure

that you connect the Safety Extra-Low Voltage as specified.

YASKAWA SIEPC71061737D GA800 Drive Technical Reference

5.2 European Standards

Troubleshooting