YASKAWA GA800 Technical Reference page 887

Note:
Refer to Setting Procedures for Multi-step Speed Operation on page 796
■
4: Multi-Step Speed Reference 2
Setting Value Function
4 Multi-Step Speed Reference
2
Note:
Refer to Setting Procedures for Multi-step Speed Operation on page 796
■
5: Multi-Step Speed Reference 3
Setting Value Function
5 Multi-Step Speed Reference
3
Note:
Refer to Setting Procedures for Multi-step Speed Operation on page 796
■
6: Jog Reference Selection
Setting Value Function
6 Jog Reference Selection
■
7: Accel/Decel Time Selection 1
Setting Value Function
7 Accel/Decel Time Selection
1
Note:
Refer to C1: Accel & Decel Time on page 769
■
8: Baseblock Command (N.O.)
Setting Value Function
8 Baseblock Command (N.O.)
The keypad flashes bb [Baseblock]. If you cancel the baseblock command when the Run command is active, the drive
will restart the motor and use the speed search function.
ON : Baseblock (drive output stop)
OFF : Normal operation
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
V/f CL-V/f OLV CLV AOLV
Uses speed references d1-01 to d1-16 to set a multi-step speed reference.
V/f CL-V/f OLV CLV AOLV
Uses speed references d1-01 to d1-16 to set a multi-step speed reference.
V/f CL-V/f OLV CLV AOLV
Sets the drive to use the JOG Frequency Reference (JOG command) set in d1-17. The JOG Frequency Reference (JOG command)
overrides Frequency References 1 to 16 (d1-01 to d1-16).
V/f CL-V/f OLV CLV AOLV
Sets the drive to use Acceleration/Deceleration Time 1 [C1-01, C1-02] or Acceleration/Deceleration Time 2 [C1-03, C1-04].
for more information.
V/f CL-V/f OLV CLV AOLV
Sets the command that stops drive output and coasts the motor to stop when the input is ON.
Figure 12.79 Baseblock Command Time Chart
for more information.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
for more information.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
for more information.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
12.8 H: Terminal Functions
12
887