YASKAWA GA800 Technical Reference page 378

7.4 Fault
Code Name
oFb16 Option Receive Frame Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb17 Option Receive Abort Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC00 Option Not Compatible with Port
Note:
• Do a Fault Reset to clear the fault.
• Fault trace is not available for these faults.
Code Name
oFC01 Option Fault/Connection Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC02 Duplicate Options
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC03 Diagnostic Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC04 Flash Write Mode
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC05 Option A/D Error
Note:
Do a Fault Reset to clear the fault.
378
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
The option connected to connector CN5-C is not
compatible.
Causes
The option card connected to connector CN5-C was
changed during operation.
Causes
The same option cards or the same type of option
cards are connected to connectors CN5-A, B, and C.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
Connect the option to the correct connector.
Note:
AI-A3, DI-A3, and communication options cannot be connected
to the CN5-C connector.
Possible Solutions
1. De-energize the drive.
2. Refer to the option card manual and correctly connect the
option card to the connector on the drive.
Possible Solutions
Connect the option card to the correct connector.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference