8.4 Replace Cooling Fans and Circulation Fans
2.
Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
3.
Put the cables in the recess of the drive.
A - Front of drive
Make sure that the cables and connectors are in the correct space.
*1
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on the
drive.
A - Front of drive
B - Drive holes
438
Figure 8.10 Install the Cooling Fans
Figure 8.11 Put the Cables and Connectors in the Drive Recess
Figure 8.12 Reattach the Fan Finger Guard
C - Front of drive
B - Space for cables
*1
C - Connector tabs
YASKAWA SIEPC71061737D GA800 Drive Technical Reference