YASKAWA GA800 Technical Reference page 445

2.
Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
Make sure that the cables and connectors are in the correct space.
*1
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on the
drive.
A - Front of drive
B - Drive holes
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Figure 8.29 Install the Cooling Fans
Figure 8.30 Put the Cables and Connectors in the Drive Recess
Figure 8.31 Reattach the Fan Finger Guard
8.4 Replace Cooling Fans and Circulation Fans
C - Front of drive
B - Space for cables
*1
C - Connector tabs
8
445