YASKAWA GA800 Technical Reference page 435

■
Fan Removal
1.
To remove the fan finger guard from the drive, push the hooks on the left and right sides of it and pull up.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Disconnect the relay connector and remove the fan from the
drive.
A - Cooling fan
■
Fan Installation
Reverse the removal procedure for fan installation.
1.
Connect the relay connector between the drive and cooling fan.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Figure 8.1 Remove the Fan Finger Guard
Figure 8.2 Remove the Cooling Fan
Figure 8.3 Connect the Relay Connector
8.4 Replace Cooling Fans and Circulation Fans
8
435