YASKAWA GA800 Technical Reference page 437

■
Fan Removal
1.
To remove the fan finger guard from the drive, push the hook on the back side of the fan finger guard and pull
up.
A - Fan finger guard
2.
Pull the cooling fans straight up from the drive. Disconnect the relay connectors and remove the fans from the
drive.
A - Cooling fans
■
Fan Installation
Reverse the removal procedure for fan installation.
1.
Connect the relay connectors between the drive and cooling fans.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Figure 8.7 Remove the Fan Finger Guard
Figure 8.8 Remove the Cooling Fans
Figure 8.9 Connect the Relay Connectors
8.4 Replace Cooling Fans and Circulation Fans
8
437