YASKAWA GA800 Technical Reference page 376

7.4 Fault
Code Name
oFA40 CtrlResSel 1Err
Note:
Do a Fault Reset to clear the fault.
Code Name
oFA41 Drive Receive Time Over 4
Note:
Do a Fault Reset to clear the fault.
Code Name
oFA42 CtrlResSel 2Err
Note:
Do a Fault Reset to clear the fault.
Code Name
oFA43 Drive Receive Time Over 5
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb00 Option Not Compatible with Port
Note:
• Do a Fault Reset to clear the fault.
• Fault trace is not available for these faults.
Code Name
oFb01 Option Fault/Connection Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb02 Duplicate Options
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb03 Diagnostic Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb04 Flash Write Mode
Note:
Do a Fault Reset to clear the fault.
376
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
The option connected to connector CN5-B is not
compatible.
Causes
The option card connected to connector CN5-B was
changed during operation.
Causes
The same option cards or the same type of option
cards are connected to connectors CN5-A, B, and C.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
Connect the option to the correct connector.
Note:
DO-A3, AO-A3, PG-B3, and PG-X3 options can connect to
connector CN5-B. To connect only one PG option card, use the
CN5-C connector.
Possible Solutions
1. De-energize the drive.
2. Refer to the option card manual and correctly connect the
option card to the connector on the drive.
Possible Solutions
Connect the option card to the correct connector.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference