YASKAWA GA800 Technical Reference page 448

8.4 Replace Cooling Fans and Circulation Fans
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
*1 Make sure that the cables and connectors are in the correct space.
4.
Hold the fan finger guards at an angle and put the connector tabs on the fan finger guards into the holes on
the drive.
Note:
When you install the cooling fans, make sure that you do not pinch cables between the fan finger guards and the drive.
A - Front of drive
B - Insertion area
448
Figure 8.37 Put the Cables and Connectors in the Drive Recess
Figure 8.38 Reattach the Fan Finger Guards
B - Space for cables
*1
C - Connector tab
YASKAWA SIEPC71061737D GA800 Drive Technical Reference