12.11 O: Keypad-Related Settings; O1: Keypad Display Selection - YASKAWA GA800 Technical Reference

12.11 o: Keypad-Related Settings

o parameters set keypad functions.
Note:
You cannot set these parameters with the optional LED keypad.
No.
o1-05 LCD Contrast Adjustment
o1-24 to o1-35: Custom Monitor 1 to 12
o1-36 LCD Backlight Brightness
LCD Backlight ON/OFF Selection
o1-37
LCD Backlight Off-Delay
o1-38
Show Initial Setup Screen
o1-39
Home Screen Display Selection
o1-40
1st to 3rd Monitor Area Selections/Settings
o1-41 to o1-46:
Trend Plot 1 or 2 Scale Settings
o1-47 to o1-51:
Analog Gauge Area Selection/Setting
o1-55 to o1-56:
bCE Detection Selection
o2-27
◆

o1: Keypad Display Selection

o1 parameters select the parameters shown on the initial keypad screen and to configure the parameter setting units
and display units. These parameters also adjust the backlight and contrast of the LCD display.
■
Home Screen Display Format
o1-40 [Home Screen Display Selection] changes the display of the monitor shown on the Home screen. You can show
numerical values or one of these three displays on the Home screen monitor:
A - Set Ux-xx [Monitors] to o1-24, o1-25, and o1-26.
B - Set display regions to o1-41, o1-43, and o1-45.
A - Set Ux-xx [Monitors] to o1-24.
B - Set display regions to o1-56.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
Table 12.72 Parameters You Cannot Set with the LED Keypad
Name
Figure 12.146 Bar Graph Display
Figure 12.147 Analog Gauge Display
12.11 o: Keypad-Related Settings
No.
o3-04 Select Backup/Restore Location
o3-05 Select Items to Backup/Restore
o3-06 Auto Parameter Backup Selection
Auto Parameter Backup Interval
o3-07
Time Format
o4-22
Date Format
o4-23
bAT Detection Selection
o4-24
Log Start/Stop Selection
o5-01
Log Sampling Interval
o5-02
Log Monitor Data 1 to 10
o5-03 to o5-12:
C - Set display ranges to o1-42, o1-44, and o1-46.
C - Set display ranges to o1-55.
Name
12
1035