YASKAWA GA800 Technical Reference page 922

12.8 H: Terminal Functions
■
1A: During Reverse
Setting Value Function
1A During Reverse
ON : The motor is operating in the reverse direction.
OFF : The motor is operating in the forward direction or the motor stopped.
■
1B: During Baseblock (N.C.)
Setting Value Function
1B During Baseblock (N.C.)
ON : The drive is not in baseblock.
OFF : During baseblock
■
1C: Motor 2 Selected
Setting Value Function
1C Motor 2 Selected
ON : Motor 2 Selected
OFF : Motor 1 Selected
■
1D: During Regeneration
Setting Value Function
1D During Regeneration
ON : Motor is regenerating.
OFF : Motor is operating or stopped.
■
1E: Executing Auto-Restart
Setting Value Function
1E Executing Auto-Restart
The terminal deactivates when the Auto Restart function automatically resets a fault. The terminal deactivates when
the Auto Restart function detects the fault again because there were too many restart attempts as specified by L5-01
[Number of Auto Restart Attempts].
Note:
Refer to L5: Fault Restart on page 986
922
V/f CL-V/f OLV CLV AOLV
The terminal activates when the motor operates in the reverse direction.
Figure 12.99 Reverse Operation Output Time Chart
V/f CL-V/f OLV CLV AOLV
The terminal deactivates during baseblock. When the drive is in baseblock, the drive output transistor stops switching and does not
make DC bus voltage.
V/f CL-V/f OLV CLV AOLV
The terminal activates when you select motor 2.
V/f CL-V/f OLV CLV AOLV
The terminal activates on when the motor is regenerating.
V/f CL-V/f OLV CLV AOLV
The terminal activates when the Auto Restart function is trying to restart after a fault.
for more information.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA SIEPC71061737D GA800 Drive Technical Reference