Operation And Software; Print- And Printstyle Parameters; Print Modes Of The High Speed Line - Leibinger JET Rapid Operating Manual

Page 24

5 Operation and Software

5.1 Print- and printstyle parameters

Information
There is no difference from the software surface and therefore of the
operating in comparison of the standard JET3up.
Only the selection of the available print modes and the ink types in depending
on the selected printerype is limited.
The following section describes the respective, changed software menus of
the different printer types of the High Speed Line.

5.2 Print modes of the High Speed Line

5.2.1 Available print modes for the JET Rapid
 Click inside the respective jobeditor on the menu <settings> and click on the option
<Printstyle>.
The available print modes for the JET Rapid are just exactly the
same as for the standard JET3up.
High Speed Line
Information
Release R.1.02