Operation; Construction/Structure Of The Device; Figure 12 - Equipment Configuration/General View - Leibinger JET2NEO Manual

Page 50

6. Operation

6.1 Construction/Structure of the device

The high-performance LEIBINGER JET2neo is manufactured of a solid two parts stainless
steel cabinet. Due to the two parts construction you will get a thermal separation between the
hydraulic- and electronic section. The device consists of the following main components.
Figure 12
Equipment configuration (General view)
5
1 – Electronic cabinet
2 – TFT – Touch Display
3 – Hydraulic cabinet
In the closed electronic cabinet you will find the essential electronic components as power
supply, the TFT-Touch Display as well as the controller board.
The central arranged TFT-Touch Display describes the interactive interface for the operator.
This central entry medium with its 5.7" color display with backlight allows clear, self-explaining
operator guidance without additional keys and switches.
In the hydraulic cabinet you find all components which are required for the transportation and
preparation of ink as well as the two reservoir tanks for ink and solvent. The unpressurized
tanks can be refilled without interrupt procedure, odorless and splash-free during the operation.
Release R1.12 en
Operation – Elements and procedures
4
1
2
3
6
1
3
4 – Reservoir tank „Solvent"
5 – Reservoir tank „Ink"
6 – Print head with umbilical
Group 6
JET2 neo