Operation; Construction/Structure - Leibinger Jet 2 Manual

Group 6 Operation – Construction/Structure Page 43

6. Operation

6.1 Construction/Structure

The LEIBINGER-JET 2 high performance printer is manufactured from a solid high grade
steel cabinet. It consists of the following main components.
Figure 12
1 – Electronics cabinet
2 – LCD touch display
3 – Hydraulics cabinet
4 – Refill unit
5 – Print head with
head umbilical
The fundamental electronic components of the LEIBINGER- JET 2 such as the mains part,
the LCD touch display and the controller board are accommodated in the electronics
cabinet.
The LCD touch display serves the display of the system conditions of the LEIBINGER-JET
2 and the operation of the device.
All components that are necessary for the conveying and preparation of the ink are
accommodated in the hydraulics cabinet.
The refill unit serves the supply of the consumables. It contains two separate storage
containers for ink and solvent.
The print head contains all mechanical, electronical and hydraulic components that are
necessary for the creation of an inscription. It is connected to the hydraulics cabinet via a
flexible tube. Screw threads for secure fastening are integrated into the cabinet of the print
head.
Release 3.00 Leibinger-Jet 2 se